PISO-CAN400U/PISO-CAN200U Universal PCI CAN Card compatible with Windows 98/ME/NT4/2000/XP

PISO-CAN200U/PISO-CAN400U is an economic solution of an active CAN board with universal PCI bus. It has 2 or 4 independent CAN bus communication ports with 5-pin screw terminal connectors or 9-pin D-sub connectors, and has the ability to cover a wide range of CAN applications. Besides, PISO-CAN200U/PISO-CAN400U uses the new CAN controller NXP SJA1000T and transceiver 82C250/251, which provides bus arbitration, error detection with auto correction and re-transmission functions. It can be installed in both 3.3V and 5V PCI slot and supported truly "Plug & Play".

System-Characters

LabVIEW Tool
In order to apply the PISO-CAN200/400 to CAN network with NI LabVIEW, we provides a LabVIEW7/7.1toolkit for the purpose. It is a useful tool to develop the CAN-relative application in NI LabVIEW environment by using PISO-CAN200/400. It is easy to use and can help user to rapidly reduce their program development cycle. If users want to develop a LabVIEW industrial application with CAN network, the LabVIEW CAN driver is very helpful.

• Support extension arbitration id
• Support debug receive mode
• Start byte of output
• Support LabVIEW 7/7.1
• Scaling range to select
• Two languages, German and English
• Selectable data rates (baud): 10K, 20K, 50K, 125K, 250K, 500K, 800K, 1M, and user defined

CANopen Tools
In order to apply the CANopen protocol on the PISO-CAN/200/400 easily, we provides two CANopen application Tools, which are CANopen library and CANopen diagnosis application tool. If users want to develop an industrial application with CANopen protocol, the CANopen library is very helpful to be applied with the PISO-CAN200/400 as the CANopen devices with the features of CANopen protocol. Besides, if the monitor and diagnosis of CANopen message on the CAN network is considered, the CANopen diagnostic application tool can be used to achieve this purpose.
 
CANopen Application Tool Features:

• Follow DS301 version 4.02
• Auto defecting CANopen slave devices
• IO monitor
• Dynamic PDO
• NMT master
• Support the Guarding and Heart beat protocol and SYNC message
• Selectable data rates (baud): 10K, 20K, 50K, 125K, 250K, 500K, 800K, 1M

DeviceNet Tools
DeviceNet is a low level network that provides connections between simple industrial devices (sensors, actuators) and higher level devices (controllers). It allows direct peer to peer data exchange between nodes in an organized and, if necessary, deterministic manner. We provides DeviceNet library for users to develop the specific DeviceNet application by PISO-CAN200/400. In addition, we also provide the DeviceNet diagnosis application tool to monitor and diagnose the DeviceNet message through CAN network. It provides the DeviceNet communication protocol interface to control and analysis the DeviceNet slaves.

DevcieNet Application Tool Features

• Auto defecting DeviceNet slave devices
• IO monitor
• Message monitor & diagnosis
• Support UCMM capable devices
• Support the Predefined Master/Slave connection set
• Selectable data rates (baud): 125K, 250K, 500K

Order Information

Please contact your IPC2U representative or sales@ipc2U.de for further information.