JetNet 4706f - the new manageable industrial PoE switch in the Computex Taipei Award winner tradition!

JetNet 4706f is an improved and strengthen manageable industrial PoE switch. It is the successor of Best Choice of Computex Taipei Award winner, the JetNet 3705/3705f. JetNet 4706f is equipped with 4x 30-Watts 10 / 100 Power over Ethernet Ports with two redundant fiber ports. Thus it is an perfect solution for remote networking such as IP surveillance, wireless access point.etc, with a not conveniently located power source.
It offers smart PoE control and schedule management. Each of the four PoE ports can be configured in a weekly schedule on hourly basis and PoE on/off can be remote controlled via SNMP and Web. JetNet 4706f fulfils both IEEE 802.3af PoE as well as the pioneer standard of IEEE802.3at PoE Plus design (enhancement of 802.3af) for boosting PoE delivery up to 30W in each of the four PoE ports. JetNet 4706f can auto-detect 24V & 48V power input and deliver 24V & 48V PoE output allows more applications where 48VDC is not an option.

The two uplink ports of JetNet 4706f can be configured as Rapid Super Ring ports recovering network failure in less than 5ms or RSTP ports integrating with other standard switches. JetNet 4706f  also supports full network management features like SNMP v3, QoS, IGMP v3. If the powered device fails to respond after a pre-configured time interval, JetNet 4706f will reboot the powered device and set forth to monitor the powered device in every pre-determined time interval. Only put, the unmanaged powered devices can be controled over JetNet 4706f. The IP-31 rigid aluminum flat chassis in connection with wide operating temperature range guarantee a reliable functioning in remote network site such as public transportation station or outdoor area.


Order information
Contact: sales@ipc2U.de or by FON: +49 (0)511 807 259 0

JetNet 4706f

Features:

• Four 10/100 TX Power over Ethernet ports and two redundant 10/100 FX uplink ports
• DC 24V Power Input for DC 22V output through Ethernet (Non-standard PoE)
• DC 48V Power Input for IEEE 802.3af 48V PoE output (IEEE 802.3af)
• Up to 30W per port for High Power solution by Power Input DC 55 (IEEE 802.3at)
• Up to 100W for total power budget
• Support IEEE 802.3af for PoE detection and PoE classification resistors
• PoE control and schedule by hour/weekly basis
• Auto-detect Powered Device status for device auto-reset (LPLD)
• Patented Rapid Super Ring technology (RSR), back up system recovery time less than 5ms
• SNMP v1/v2c/v3, IGMP snooping v1/v2/v3, RMON, VLAN, QoS Network security by IP/MAC address, SSL and SSH
• Built-in hardware watchdog timer for system auto-reset
• Aluminum rugged enclosure with IP-31 grade protection
• Forced mode Powering
• -40~60°C operating temperature for hazardous environment application